Introduction
If you want to save the full amount of your bond, you have to make a serious effort. You can hire a bond cleaning company in Australia to clean your dirty premises. Professional bond cleaners do their cleaning using state-of-the-art tools and techniques to ensure that you get your full security deposit back without any controversy.
If your budget is low, you can also arrange your own bond cleaning. Here is a complete end-to-end lease cleaning guide that will make your job easier, especially if you are doing it for the first time.
1. Prepare ahead of time.
Before you end the strip cleaning process, make sure you have all the necessary cleaning tools and products available. It is important to make a clean checklist and note down the items that will be needed during the cleaning process. Make sure you have the following items on your list:
*Vacuum cleaner
*broom
*Sponge
*Clean cloth or paper towels.
*Patchwork
*Magician
*White vinegar and baking soda
*Bleach
2. Start from the top.
It is always best to start with the upper part of the strap cleaning process. Your property in this area includes all the high places that are often overlooked such as roof walls, fans, air ducts, light fixtures, high windows, stairs etc.
So, instead of starting from the bottom of your room, make sure to remove the gravel stones, dust and dirt from the roof. When you’re there, don’t forget to replace the bulb and filter.
Professional bond cleaners in Australia recommend a ‘top-down’ cleaning method. Start with the ceiling, fans, skirting, light fixtures, corners and then decorate the windows, shelves, carpets and floors.
3. Get rid of stains, grease, mold and mildew.
Whether it’s a hard spot on the carpet or a mold on the tile grout, both should be removed by your landlord before the property is inspected. End of lease cleaning there are many home remedies to help you get rid of grease, stains and molds from different surfaces of your premises.
You can use baking soda as an environmentally friendly cleaning solution to remove these dirty molds. Here is a simple grease or mold removal process that can give you the best possible results without the use of harmful chemicals or cleansers.
4. Clean window curtains.
These are just some of the goal setting shareware that you can use. Most people forget to clean window curtains such as curtains, blinds and drapes. Therefore, be sure to remove dust from removable curtains and drapes using a vacuum cleaner.
5. Emphasize the cleanliness of large appliances.
Most of us forget to clean our kitchen appliances like microwave, refrigerator and dishwasher. If you have any of these tools, make sure you’ve cleaned and sanitized them at the end of the lease cleaning process. Here are some tips to help you clean these tools:
6. Keep pro-cleaning tips in mind
Lease cleaning is not the same as regular house cleaning or spring cleaning. If you want to protect your entire bond money, you need to try the following cleaning methods.
(a) Thoroughly clean your kitchen. Clean countertops and cupboards. Also, clean the doors and sides of drawers and cupboards. Clean and sanitize your sink.
(b) Vacuum carpets, rugs and other floor coverings to get rid of dust particles, dust marks that accumulate deep inside the fibers.
(c) Have your carpet professionally cleaned by a reputable bond cleaning company in Australia.
Conclusion
Cleaning rental property is not an easy task like a profession. All you need is time, cleaning skills and help to get your bond back in full. With the help of the Lease Cleaning Guide mentioned above in this post, you can easily do the cleaning work.